Grille ceiling cold roll forming machine

Working Process

Automatic grid production line

 

Automatic connector production line+Manual bending machine 

Feeding+straighten--punching+cutting--bend by manual               

Parameters and specification 

Automatic grid production line

(1) Dispensing rack:

1 no power load 1T.

2 material inner hole diameter 400mm~500mm.

  

(2) With straight puller:

1It adopts 40r quenching and tempering treatment, and the 3-roller roller constitutes a pulling aid to play a straight role.

2 motor power: 1.5 kW Voltage: 380V adjustable speed

 

 

(3) Electric control box + feeder:

1Adopting the Yaskawa servo motor to drive the roller type feeding structure

2 power: 1.5 kW, speed: 2000 rpm, using human-machine interface control with independent control box

3 Specifications: The grid spacing can be controlled in any way, and the thickness can be 0.4~0.6.

 

 

(4) Punching pitch section:

1 using 16t punch to fight 2t small punch cutting form.

216t punch power: 1.5 kW Voltage: 380V 120 times /min

16t small punch power: 1.6 kW Voltage: 380V 180 times / min

1 Control the pitch and length specifications by plc

(5) Conveyor belt:

1 The punched semi-finished product is sent to the molding machine by a conveyor belt.

2 conveyor belt motor power: 0.75 kW Voltage: 220V adjustable speed

 

 

(6) Product 10.5 bottom 45 height molding machine

Product material quality ：	aluminum
Product material thickness：	0.4-0.6mm
Product material width：	As customized
Product forming speed：	15m/min
Equipment power：	About 4 KW
Equipment voltage：	AC380V，50Hz,three-phase AC
Production line direction：	Face to the control box, from left to right

 

1. Equipment structure:

(1) Host part:

--Rack—Using the overall structure, channel steel welding chassis, 16mm bottom plate, side plate 25mm thick fine grinding and milling edge, fine bearing position rear line cutting bearing slider groove

--Feed inlet—guide guide

--Forming rolling wheel - using 14 sets of rolling wheels

--rolling wheel-45# steel, quenched, hard chrome plated.

--Spindle—?38mm in diameter and 45# steel.

--Spindle bearing—HRB6206 ball bearing is used for each side plate and lower shaft

--Host power - main motor power 4 kw

--Main drive system—The drive is connected to the linkage gear by the motor through the 250 reducer sprocket to drive the idler to rotate synchronously.

--Straightening system—Use, 1 set of wheels to straighten.

Shijiazhuang YingYee import&export co.,ltd